From b17f880e6d9b423ac154b1869d35dacd6453d147 Mon Sep 17 00:00:00 2001 From: tomcw Date: Sun, 9 Dec 2018 11:48:22 +0000 Subject: [PATCH] HDD: Added a swap HDD function to the Config->Disk UI (#585) --- help/cfg-disk.html | 34 ++++++++---------- help/ddi-harddisk.html | 8 ++--- help/img/disk.png | Bin 34265 -> 35119 bytes resource/Applewin.rc | 1 + resource/resource.h | 1 + source/Configuration/PageDisk.cpp | 56 +++++++++++++++++++++--------- source/Configuration/PageDisk.h | 2 ++ source/Harddisk.cpp | 12 +++++++ source/Harddisk.h | 1 + 9 files changed, 74 insertions(+), 41 deletions(-) diff --git a/help/cfg-disk.html b/help/cfg-disk.html index 96dc370c..67df107c 100644 --- a/help/cfg-disk.html +++ b/help/cfg-disk.html @@ -1,23 +1,13 @@ - - - - - Disk Settings - - - -

Disk Settings

- -
Disk settings +

Floppy Controller Settings:

Disk Access Speed:
Here you can choose the speed at which the system can access @@ -26,14 +16,14 @@ By default, you would want "Enhanced Speed" so that data can be accessed as fast as possible. However, it is also possible that certain programs might depend on the "Authentic Speed" to function properly. This is the speed at which the real hardware -would access data from your drives.

- +would access data from your drives. +

Disk 1/2 drop-down menus:
- These menus allow you to select floppy disk images (.dsk files) to 'insert' into the -emulated floppy drives 1 and 2. This can also be done during emulation by using the toolbar or using the F3/F4 keys. Diskettes can be swapped by pressing F5 during emulation. You can also eject images from this menu.

+emulated floppy drives 1 and 2. This can also be done during emulation by using the toolbar or using the F3/F4 keys. Diskettes can be swapped by pressing F5 during emulation. You can also eject images from this menu. +

Hard disk Controller Settings:

@@ -42,16 +32,20 @@ A hard disk controller (or interface) card can be plugged in to slot 7 by checki See Hard disk Images for more details.

+

Swap:
+Swap the hard disk images.
+WARNING! If done during image access this could result in undefined behavior (eg. Apple II program crash) or data corruption on the image. +

+

HDD 1/2 drop-down menus:
- These menus allow you to select hard disk images (eg. .hdv files) to -connect to the emulated hard disk controller card. You can also unplug images from this menu.

- - -Path to CiderPress:
+connect to the emulated hard disk controller card. You can also unplug images from this menu. +

+

Path to CiderPress:
Use this to specify where CiderPress is installed.
The right mouse button context menu on either of the drive icons allows you to open CiderPress with the image in the drive. +

diff --git a/help/ddi-harddisk.html b/help/ddi-harddisk.html index a1d579ed..046583de 100644 --- a/help/ddi-harddisk.html +++ b/help/ddi-harddisk.html @@ -3,7 +3,7 @@ - Transferring Disk Images + Hard Disk Images @@ -20,8 +20,9 @@ Just check Enable hard disk controller in slot 7.

There is provision to connect two hard disks to this card. -This is done by using .hdv files on your PC. +This is done by using .hdv or 800KB .2mg files on your PC. Each hard disk can have a maximum capacity of 32MB.

+NB. The hard disk controller supports both fixed-disk types (up to 32MB) and 3.5" floppy types (800KB).

On booting, the Apple will always attempt to @@ -33,9 +34,6 @@ interface card in it).

To boot a floppy disk with the hard disk card enabled, either hold down the Open-Apple key during an Apple II restart or issue PR#6 from an AppleSoft prompt.

-

You can download sample .hdv -images from Asimov (eg. ftp://public.asimov.net/pub/apple_II/images/utility/misc/hardpc.zip).

-

Warnings: