diff --git a/BetterJoyForCemu/App.config b/BetterJoyForCemu/App.config
index 1b7b8d9..cdd1cab 100644
--- a/BetterJoyForCemu/App.config
+++ b/BetterJoyForCemu/App.config
@@ -11,7 +11,7 @@
         but in that case also change the port in PadTest and cemuhook.ini accordingly. Default: 26760 -->
     <add key="Port" value="26760" />
 	<!--Whether the Motion Server is enabled or not. Default: true -->
-	<add key="MotionServer" value="false" />
+	<add key="MotionServer" value="true" />
     <!--Rumble motor period in millisec. Lower means more granular vibration, higher is more stable.-->
     <!--The response of rumble does not only depend on this setting and it's always high. Default: 300 -->
     <add key="RumblePeriod" value="300" />
@@ -51,8 +51,9 @@
 	<!-- When enabled, can only calibrate one controller at a time. -->
     <!-- Default: false -->
     <add key="NonOriginalController" value="false" />
-    <!-- The program will keep the HOME button LED ring light on at all times-->
-    <add key="HomeLEDOn" value="false"/>
+    <!-- The program will keep the HOME button LED ring light on at all times. -->
+	<!-- Default: true -->
+    <add key="HomeLEDOn" value="true"/>
 	<!-- Determines whether or not to translate gyro movements into joystick ("joy") or mouse movement ("mouse"), or have no effect ("none") -->
 	<!-- When "joy", turn gyro movements into joystick movement (left/right depends on setting) [not yet implemented]-->
 	<!-- When "mouse", turn gyro movements into mouse movement. Press either stick-button to reset to middle of primary display  -->
@@ -60,6 +61,9 @@
 	<add key="GyroToJoyOrMouse" value="mouse"/>
 	<!-- Sensitivity of gyro-to-mouse movements -->
 	<!-- Default: 50 -->
-	<add key="GyroMouseSensitivity" value ="50"/>
+	<add key="GyroMouseSensitivity" value="50"/>
+	<!-- When two joycons are connected, it would take the gyro movement of the right joycon for mouse movement. This swaps that -->
+	<!-- Default: false -->
+	<add key="GyroMouseLeftHanded" value="false"/>
   </appSettings>
 </configuration>
\ No newline at end of file
diff --git a/BetterJoyForCemu/Joycon.cs b/BetterJoyForCemu/Joycon.cs
index 6f2037a..bf458c5 100644
--- a/BetterJoyForCemu/Joycon.cs
+++ b/BetterJoyForCemu/Joycon.cs
@@ -344,7 +344,7 @@ namespace BetterJoyForCemu {
 				form.AppendTextBox("Using USB.\r\n");
 
 				a[0] = 0x80;
-				a[1] = 0x01;
+				a[1] = 0x1;
 				HIDapi.hid_write(handle, a, new UIntPtr(2));
 				HIDapi.hid_read(handle, a, new UIntPtr(64));
 
@@ -354,16 +354,16 @@ namespace BetterJoyForCemu {
 
 				// USB Pairing
 				a = Enumerable.Repeat((byte)0, 64).ToArray();
-				a[0] = 0x80; a[1] = 0x02; // Handshake
+				a[0] = 0x80; a[1] = 0x2; // Handshake
 				HIDapi.hid_write(handle, a, new UIntPtr(2));
 
-				a[0] = 0x80; a[1] = 0x03; // 3Mbit baud rate
+				a[0] = 0x80; a[1] = 0x3; // 3Mbit baud rate
 				HIDapi.hid_write(handle, a, new UIntPtr(2));
 
-				a[0] = 0x80; a[1] = 0x02; // Handshake at new baud rate
+				a[0] = 0x80; a[1] = 0x2; // Handshake at new baud rate
 				HIDapi.hid_write(handle, a, new UIntPtr(2));
 
-				a[0] = 0x80; a[1] = 0x04; // Prevent HID timeout
+				a[0] = 0x80; a[1] = 0x4; // Prevent HID timeout
 				HIDapi.hid_write(handle, a, new UIntPtr(2));
 
 				dump_calibration_data();
@@ -448,14 +448,14 @@ namespace BetterJoyForCemu {
 			if (state > state_.NO_JOYCONS) {
 				HIDapi.hid_set_nonblocking(handle, 0);
 
-				Subcommand(0x40, new byte[] { 0x0 }, 1);
+				Subcommand(0x40, new byte[] { 0x0 }, 1); // disable IMU sensor
 				//Subcommand(0x48, new byte[] { 0x0 }, 1); // Would turn off rumble?
 
 				if (isUSB) {
 					byte[] a = Enumerable.Repeat((byte)0, 64).ToArray();
-					a[0] = 0x80; a[1] = 0x05; // Allow device to talk to BT again
+					a[0] = 0x80; a[1] = 0x5; // Allow device to talk to BT again
 					HIDapi.hid_write(handle, a, new UIntPtr(2));
-					a[0] = 0x80; a[1] = 0x06; // Allow device to talk to BT again
+					a[0] = 0x80; a[1] = 0x6; // Allow device to talk to BT again
 					HIDapi.hid_write(handle, a, new UIntPtr(2));
 				}
 			}
@@ -501,7 +501,7 @@ namespace BetterJoyForCemu {
 
 				if (extraGyroFeature == "joy") {
 					// TODO
-				} else if (extraGyroFeature == "mouse") {
+				} else if (extraGyroFeature == "mouse" && (isPro || (other == null) || (other != null && (Boolean.Parse(ConfigurationManager.AppSettings["GyroMouseLeftHanded"]) ? isLeft : !isLeft)))) {
 					Win32.POINT p;
 					Win32.GetCursorPos(out p);
 
@@ -541,7 +541,8 @@ namespace BetterJoyForCemu {
 					// Send a no-op operation as heartbeat to keep connection alive.
 					// Do not send this too frequently, otherwise I/O would be too heavy and cause lag.
 					// Needed for both BLUETOOTH and USB to not time out. Never remove pls
-					SendRumble(rumble_obj.GetData());
+					//SendRumble(rumble_obj.GetData());
+					// TODO: Investigate if this really is safe to remove now?
 					watch.Restart();
 				}
 				int a = ReceiveRaw();
diff --git a/BetterJoyForCemu/MainForm.Designer.cs b/BetterJoyForCemu/MainForm.Designer.cs
index b0a45a2..3176221 100644
--- a/BetterJoyForCemu/MainForm.Designer.cs
+++ b/BetterJoyForCemu/MainForm.Designer.cs
@@ -325,7 +325,7 @@
 			// 
 			// AutoCalibrate
 			// 
-			this.AutoCalibrate.Location = new System.Drawing.Point(111, 112);
+			this.AutoCalibrate.Location = new System.Drawing.Point(203, 112);
 			this.AutoCalibrate.Name = "AutoCalibrate";
 			this.AutoCalibrate.Size = new System.Drawing.Size(71, 20);
 			this.AutoCalibrate.TabIndex = 8;
diff --git a/BetterJoyForCemu/MainForm.cs b/BetterJoyForCemu/MainForm.cs
index 147a3b0..4196ece 100644
--- a/BetterJoyForCemu/MainForm.cs
+++ b/BetterJoyForCemu/MainForm.cs
@@ -35,6 +35,9 @@ namespace BetterJoyForCemu {
 			if (!nonOriginal)
 				AutoCalibrate.Hide();
 
+			// Feature not yet implemented - hide
+			btn_open3rdP.Hide();
+
 			con = new List<Button> { con1, con2, con3, con4 };
 			loc = new List<Button> { loc1, loc2, loc3, loc4 };